Reduces Deep Discharge
Voltage is less likely to drop into the danger zone, providing better plate protection
The leagend SuperCap Jump Starter is a supercapacitor-based start assistance system that shares high-current load during engine cranking, helping reduce deep discharge, heat buildup, and sulfation of the battery, thereby significantly extending battery service life.
Note: Vehicle effects may vary and are not absolute figures.
Every ignition forces the battery to endure hundreds of amps of starting current. This is not just energy consumption — it is cumulative wear on battery life.
Why Batteries Die Prematurely
Every start subjects the battery to a massive current surge. leagend SuperCap Jump Starter is designed to share this burden precisely at that critical moment.
The starter motor demands hundreds of amps instantly; the battery must deliver far beyond its normal operating power
The battery bears the full load alone, with terminal voltage potentially dropping into a critical range
High current rapidly heats the battery internally; deep discharge accelerates sulfation, irreversibly damaging the plates
Repeated cumulative stress causes premature battery degradation. Studies indicate each start-up surge is a primary factor in battery aging
Core Operating Principle
During start-up, the leagend SuperCap Jump Starter rapidly delivers current to share the most damaging load from the battery. The supercapacitor's low internal resistance and high peak discharge capability make it an ideal start assistance device.
Note: Data sourced from leagend Laboratory
Voltage Stability Comparison
Conventional starting often dips into deep discharge territory; leagend supercapacitor jump starter series-assisted starting keeps voltage within a safer range, reducing plate damage and sulfation risk.
* Illustrative curves. Actual values vary by vehicle model, battery condition, and temperature.
Core Protection Logic
leagend supercapacitor jump starter series is not a single-function product. It works through three interconnected stages to reduce each major factor of battery damage at the source.
leagend supercapacitor jump starter series shares approximately 70% of the starting current; the battery handles only the remaining ~30%, significantly reducing deep discharge and plate stress
Current reduced to 30% → heat generation drops to ~90% (P=I²R), substantially alleviating thermal aging pressure on the battery
Reduced deep discharge + lower heat + slower sulfation = battery life reliably extended by 2-3x
I²R Heating Model: P = I²R. The battery's current drops from I to 0.3I, so P₂ = (0.3I)²R = 0.09 I²R — heat generation is approximately 90% of the original.
Peukert Effect: Under high-rate discharge, lead-acid battery life loss is not linearly proportional. With reduced starting current stress, the cumulative damage experienced by the battery is significantly lowered.
Five Protection Mechanisms
With every start, five layers of protection work in unison to reduce each major cause of battery damage at the source.
Voltage is less likely to drop into the danger zone, providing better plate protection
The battery no longer bears the surge alone, resulting in smoother starts
Thermal aging stress is significantly reduced, slowing battery degradation
The battery maintains a healthier condition more easily
Fewer repeated attempts in cold weather, ensuring more reliable starting
Self-Assessment Checklist
Check the items that match your usage. The page will automatically provide a recommendation.
App Visualization
Many drivers only realize their battery condition has deteriorated when starting becomes difficult. Paired with the App, the leagend SuperCap Jump Starter allows you to monitor battery voltage, start history, device status, and more — making the invisible state of your battery visible and accessible.
Monitor battery voltage performance — no more guesswork
Review start-up process and device operation logs
Check current leagend supercapacitor jump starter series status and relevant alerts
Transform the battery from a black box into an observable vehicle component
* App interface illustration. Actual interface may differ from the released version.
Product Positioning
A conventional jump starter helps once. leagend supercapacitor jump starter series helps reduce battery damage with every single start.
Model Selection
All models support 12V/24V systems. Select based on engine displacement, operating environment, and installation space.
| Product | Model | Applicable Vehicles | Voltage | Recommended Use |
|---|---|---|---|---|
|
JS200 | 12V Entry-level vehicles / up to 2.0 L | 12V |
|
|
JS300 Best Seller | Most 12V passenger vehicles / up to 3.5 L | 12V |
|
|
JS400 | Large displacement / Cold climate / High load / over 3.5 L | 12V |
|
|
JS600 | 24V commercial vehicles / Diesel / Heavy equipment |
24V |
|
Application Scenarios
From daily commuting to extreme environments, leagend supercapacitor jump starter series provides start protection for a wide range of vehicles.
Urban short-distance driving — reduces cumulative battery damage from frequent starts
Starting is more difficult in low temperatures; leagend supercapacitor jump starter series ensures more reliable cold starts
Reduces downtime caused by battery failure, lowering operational costs
Diesel engines require high starting current; leagend supercapacitor jump starter series significantly reduces battery stress
Frequently Asked Questions
No. The leagend SuperCap Jump Starter is a start assistance device that shares the high current during engine cranking. The original battery continues to handle vehicle power supply and energy storage.
A new battery is in good condition and benefits even more from proactive protection. With less exposure to deep discharge, heat, and sulfation, its degradation rate will typically be slower over time.
It redirects the most damaging starting surge away from the battery, reducing deep discharge, heat buildup, and sulfation. Over time, this cumulative protection naturally extends battery life.
Under normal installation with a correctly matched model, leagend supercapacitor jump starter series is not a high-power continuous load. Specific standby performance should be confirmed based on vehicle model and installation configuration.
Not all vehicles are directly compatible. The appropriate model must be confirmed based on voltage system, engine type, operating environment, and installation space.
The mechanism descriptions on this page are based on: lead-acid battery high-rate discharge characteristics, the Peukert effect, the I²R heating model, the Arrhenius thermal aging model, and the supercapacitor's low internal resistance and high peak discharge capability.
The charts on this page are conceptual illustrations. Actual results may vary depending on vehicle model, battery condition, temperature, usage habits, and installation method.
Confirm your vehicle type and use case, then choose the right leagend supercapacitor jump starter series model.